Can you send your Stair and output file for better analysis, like this I can compare with my output 

Which output are you using?

For noising you have 2 setting from your stair and from PP

Cheers, Alex

so each time we cut out or treads we have to manually calculate the real tread size as most of our stairs are carpet grade and we allow 25mm for nosing and have made mistakes in doing so which cost us alot of money and time.

i am looking for a solution for this, maybe there is a way to customise the method of stairmaking so we can remove the manual calculation out of the equation and follow a cutlist exactly.

i also have taken a look at each individual step to check the dimensions given and those also do not align with how we make the stairs.

Please read this article. It explains in detail how to do this.

https://wooddesigner.org/help-.....-railings/

regards

Michel 

Instead of adding a second flight, you must add consecutive landings and a flight at the end. You can shape the landings to represent a 2 step winder. It requires a bit of manual work 

Here is the stair example attached. 

If you are unable to open the file, please upgrade your software to the latest version on our website.

Regards

Michel 

can some explain how to draw the rest of balustrade  so it can be presented to the customer please? cheers

Thanks

Sure please find attached in inches Decimal and Fractional

Cheers, Alex

Could I actually get the StairFile dimensions in inches instead of mm?

Thanks

Cheers, Alex 

Do you know in which file the step dimensions in the side stringer are best visible 

Please find your stairFile attache

What you see and measure is the contact surface.

cheers, Alex

This can't be done from Stairdesigner

The risers are 30mm thick. Why is the measurement tool so off? And why are there multiple planes? 

Will follow up on the question